Speakers

alexmorro

Alex Borro

Software Engineer at 3M do Brasil (GTMax’s guest)

With a degree in Mechatronics Engineering from Unicamp, Alex was responsible for developing mobile software at Motorola do Brasil. At Roberto Bosch do Brasil, he oversaw the development of software for electronic injection in Otto cycle engines. He has been at 3M do Brasil since 2013, and is responsible for developing embedded software and support for additive manufacturing.

 
andre

André Luiz Jardini Munhoz

Lecturer and Researcher at Unicamp (guest AMS)

André is currently a researcher at Brazil’s National Institute for Biofabrication Science and Technology (INCT-BIOFABRIS). He earned a Mechanical Engineering degree from the Piracicaba School of Engineering (EEP, 1994), and a Masters and a Ph.D. in Mechanical Engineering, both from the Campinas State University (UNICAMP, 2001). He holds four postdoctoral degrees: one from the Rio Grande do Sul Federal University (UFRGS, 2001-02), one from the Leiria Polytechnic Institute, Portugal (2003-04), and two from the Campinas State University (UNICAMP, 2002-03 and 2004-10). He currently holds a research grant for Productivity and Technology Development and Innovation (Level 2) from Brazil’s National Council for Scientific and Technological Development. André has been working mainly in the following areas: prototyping and rapid manufacturing applications, virtual prototyping (CAD, CAE and Reverse Engineering), laser materials processing, materials development for rapid prototyping, process simulation, biomimetics, CFD, thermal and kinetic simulation, biofabrication, tissue engineering and scaffolding.

 
Arthur Igreja

Arthur Schuler da Igreja

CEO of Disrupt Training (3D Cloner’s guest)

Arthur is a businessman, a professor at FGV and a lecturer. He has done work in more than 25 countries, and has certification from Harvard and Cambridge Universities. He is a Ph.D. candidate at ESC Rennes, France, and has Master’s degrees from Georgetown University (USA), ESADE (Spain) and FGV.

 
bruno-gobbato

Bruno Borralho Gobbato

Medical Director Scientific at IOT Jaraguá

A shoulder and elbow orthopaedic surgeon, Bruno is the Science Director of Catarinense for Orthopaedics and Traumatology, the President of the IT Commission at the Brazilian Society of Orthopaedics and Traumatology, and an app developer.

 
carlos

​​Carlos Eduardo Podestá

Exclusive Representative for Tekna Plasma Systems

As a Metallurgical Engineer graduated from FEI at São Bernardo do Campo, Carlos specialized in Analytical Equipment Sales at Leco (USA and Canada), and in powder metallurgy at the Powder Metallurgy World Congress (USA, 2014, and Sweden, 2013). He holds a Ph.D. in Materials Engineering from IPEN. He has experience in developing powder metallurgy techniques and in developing alloys through microfusion. He has coordinated several research projects: microfusion of Ni-Cr and Co-Cr metal alloys, and high energy grinding and atomization of Ni-Cr and Co-Cr metal alloys; plasma spheriodization of metallic powders for additive manufacture; inductive plasma reconditioning of metallic powders for additive manufacture; research, development and improvement of gas atomized metallic powders in selective laser fusion and electron beam melting for producing orthopaedic prostheses. He is a co-owner of Highbond, a manufacturer of metal alloys.

 
clayton

Clayton Neri de Oliveira

Executive Director at Colen Industrial

With a Master’s degree in Management, a Ph.D. in Strategic Management and Marketing, and a Ph.D. in Foreign Trade, Clayton is a Managing Partner at Summa Technology Consulting and Training, and an Executive Director at Colen/Envisiontec. He has specialized in Innovation and Technology Processes with an emphasis on Rapid Prototyping for the dental, hearing, jewellery and medical sectors. He is a leadership and management business consultant in the commercial, administrative, and planning areas, and on innovation in production processes. He has also specialized in the development and implementation of strategic planning, commercial expansion projects, and new products development.

 
cris

Cristiane Brasil Lima Ulbrich

​​​​​​Senior Specialist at 3M, Lecturer at SENAI, Partner in UP3D

With a Master’s degree and a Ph.D. in Mechanical Engineering from UNICAMP, Cristiane has worked as a postdoc researcher on Additive Manufacturing at Brazil’s National Institute for Biofabrication Science and Technology (BIOFABRIS). She is currently a senior specialist in the R&D department of 3M do Brasil, a graduate lecturer at SENAI, and a partner in UP3D – a company marketing 3D printers and scanners in Brazil. Cristiane has done multidisciplinary training in Design Thinking and Intellectual Property. She has also coordinated PIPE projects for FAPESP. She has authored two books: “Management of Tooling Shops” and “Computer-Integrated Engineering through CAD/CAM/CNC Systems: Principles and Applications”.

 
daniel

Daniel Huamani

CTO at 3D Criar

With a degree in Mechanical Engineering from the Mauá School of Engineering, Daniel is the Technology Director at 3D Criar. As an Engineering Projects Coordinator in the oil and gas industry, and later as a Latin American Specialist for Autodesk do Brasil, he has done work associated with scanning, modeling and 3D printing technologies. He then decided to venture into the area of 3D printing with 3D Criar, doing research and development of advanced equipment in connection with workflows involving hardware and software.

 
Fernando-Tachikawa

Fernando Tachikawa

Director at Renishaw in Latin America

Fernando earned a degree in Production Engineering from FEI, and a Ph.D. in Management from ESPM. He has had experience in CAD/CAM technologies, 3D printing and measurement technologies. He is currently the director of Renishaw Latino Americana, a company specializing in solutions to improve productivity in manufacturing operations and to increase the reliability of manufacturing processes. Among those is a metallic 3D printing process which has been developed and is manufactured by Renishaw, and is also used in their own customized medical prostheses manufacturing divisions and in their solutions centers.

 
guiherme-castellin

Guilherme Rodrigues de Carvalho Castellini

Chief Designer at 3D Procer

With a B.A. in Product Design by the Mauá Institute of Technology and a degree in Digital Design from Anhembi Morumbi University, Guilherme has had eight years’ experience with products, working as Industrial Designer, as Packaging Designer in the cosmetic industry, and as Senior Designer and Projects Development Leader at SENAI São Paulo Design. He has created and implemented successful cases for companies such as Avon, Natura, Jequity, Faber-Castell, Amway, Disney, Baumer and Siemens. Guilherme has won national and international design awards. Among those are Mabe GE, Tok Stok, Inova Whirlpool, Idea Awards Brasil, and Objeto Brasil.

 
Jefferson

Jefferson de Oliveira Gomes

Regional Director at Senai-SC and Lecturer at ITA

With a graduate degree in Mechanical Engineering, a Master’s in Mechanical Engineering and a Ph.D. from UFSC in cooperation with RWTH-Aachen, Germany, Jefferson has been a lecturer in the Mechanical-Aeronautical Engineering division of ITA since January 2004. He also coordinates the Center for Competence in Manufacturing (CCM-ITA), advises undergraduate, master’s and post-graduate research students, and holds a CNPq research grant on productivity in research. He has both industrial and academic experience in Mechanical Engineering and Production, working mainly in the following areas: performance analysis of manufacturing processes, analysis of organizational and technological performance of industrial plants, support for industrial decision-making, sustainability in manufacturing processes and innovation management. Between 2011 and 2014, Jefferson worked as Executive Manager for SENAI’s National Department for Technology and Innovation. He has been SENAI’s Regional Director in the state of Santa Catarina since 2015. He has also acted as a consultant for Unesco’s Advanced Manufacturing Workgroup – MDIC/MCTI/CNI/ANPEI.

 
jesse

Jesse Silva

Director at Fastparts Protótipos

With an MBA in Business Management from FGV, Jesse has worked with prototyping for more than 20 years, and co-founded Fastparts Protótipos, where he works as Technical Director. He has influenced additive materials technologies in prototyping and pilot batches. He earned a degree in Design and is a facilitator and integrator of product concepts for engineering and manufacturing.

 
juliana

Juliana Breda Soares

Director of Research and Development for PrintUp 3D

Juliana Breda is a Materials Engineer graduated from UFRGS with a sandwich graduation from Politecnico di Milano (POLIMI).
He has experience in research in the area of ​​materials science and technology: obtaining hydrogen from biomass fuel - Group of Energy Conversion Systems / POLIMI; Analysis of customized seats manufactured by CNC Machining through Three-Dimensional Digitization - Laboratory of Design and Selection of Materials / UFRGS; Study of composition, development and characterization of cationic polymer electrolyte membranes for use in fuel cells - Polymer Laboratory / UFRGS. Acted as Product Engineer in multinational Midea Carrier. Currently holds a Master's degree in Design and Technology from UFRGS and researches the implementation of polymer materials technology used in additive manufacturing by Fused Deposition Modeling (FDM). At PrintUp 3D, she acts as Director of Research and Development.

 
marcelo-del-guerra

Marcelo Del Guerra

Managing Director at Smart Dent – MMTech

He earned a degree in Mechatronics Engineering from the São Carlos School of Engineering (EESC-USP, 2001), a Master’s degree in Mechanical Engineering from the Center for Advanced Manufacturing (EESC-USP, 2004), and a Ph.D. in Mechanical Engineering from the São Carlos School of Engineering (2009). He has experience in the areas of Computer Assisted Design and Manufacturing (CAD/CAM), Statistical Process Control, Metrology and Manufacturing Process Optimization. Marcelo’s main areas of activity are: Process Control, CNC Machines, Micro-Machining, Milling and Lathing. He has been working with dental applications since 2009.

 
marcelo

Marcelo Fernandes de Oliveira

Specialist at CTI Renato Archer (UP3D’s guest)

A Master in Mechanical Engineering in Materials and Manufacturing from UNICAMP, a Bachelor of Mathematics from the Campinas Pontifical Catholic University (PUC-Camp), and a doctorate student at UNICAMP’s School of Mechanical Engineering, Marcelo currently works at the Renato Archer Information Technology Center (CTI), a research unit of the Ministry of Science, Technology and Innovation in Campinas. In the last 19 years, has helped develop, implement and disseminate applications of additive manufacturing technologies, or 3D printing, through the following incentive programs: ProIND, focusing on product development for companies and industries; ProMED, providing solutions for complex medical surgeries; and ProEXP, designing 3D physical systems for scientific experiments.

 
octavio

Octávio Camargo Schichi

Business Development Engineer at Höganäs

Octávio has a degree in Materials Engineering from the São Paulo University (USP) and has been in Höganäs’ Department of Innovation and Technology since 2015. He overlooks Digital Metal® technology for 3D metal printing in South America, and develops applications for Höganäs metal powders in various 3D printing systems. He also worked in trade and project management at Plastic Omnium. At the Department of Aerospace Science and Technology’s Institute of Aeronautics and Space (IAE- DCTA), he did research on titanium alloys processed through powder metallurgy, and on ceramic coatings.

 
paulo-kazuo

Paulo Kazuo Inoue

Chief Engineer at 3D Procer

Paulo is a graduate student of Control and Automation Engineering at the Mauá Institute of Technology (IMT), and a technician in Precision Mechanics from the Swiss-Brazilian SENAI School. In 2013, in Leipzig, Germany, he was awarded a silver medal in WorldSkills, the biggest vocational education competition in the world, in the category “Mechanical Engineering Design – CAD”, using Autodesk Inventor Professional software.

 
paulo

Paulo Augusto de Toledo Pacheco

Director at Tecno-How

As an expert in additive manufacturing in metals, advanced manufacturing technologies and automation, Paulo is the Commercial Director of Tecno-How, the sole representative of Concept Laser in Brazil.

 
Rafael Vidal

Rafael Vidal Peres

Collaborator with Makertech Labs and Founder of Aditiv

He holds a PhD in Materials Science from the Military Engineering Institute (IME), a Master’s in Materials Science (IME), Graduated in dentistry and postgraduate in orthodontics and temporomandibular dysfunction. In 2015, Rafael founded aditiv (www.aditiv.com.br), a lab specialized in 3D modeling and 3D printing for cranio-facial reconstructions and rehabilitation. His research encompasses the development and validation of bioabsorbable polymers for additive manufacture in bone grafting cases, as well as customized solutions for complex surgeries. In 2014, he started the first open course in three-dimensional technologies applied to dentistry.

 
roberto-camanho

Roberto Camanho

Productivity Lab Supervisor at ESPM

Roberto is a professor and supervisor at the Productivity Lab of ESPM-SP, an instructor at the Decision Making Module of the Brazilian Institute of Corporate Governance (IBGC), and a researcher at the Decide Research Center (FEA-USP). He is a former president of the Brazilian Association of Industrial Automation and of ABNT’s Robotics Committee. He has led more than one hundred strategic decision-making projects involving budgets of over R$ 100 billion in various economic sectors for companies such as Bradesco, Embraer, Petrobras, Cemig, Suzano Paper e Celulose, Vale, Whirlpool and Sabesp, as well as for the state governments of São Paulo, Minas Gerais, Rio de Janeiro and Rio Grande do Sul. An award-winning author, he holds a Master’s degree in Business Administration from FEI-SP, is specialized in Robotics from Ensam (France), and a Mechanical Engineer from FEI-SBC.

 
rodrigo

Rodrigo Krug

CEO of Cliever

With over 15 years’ experience in developing digital manufacturing and industrial automation equipment, Rodrigo is the founder and current CEO of Cliever, a pioneer manufacturer of 3D printers in Brazil, with 1000+ machines sold to companies all over South America.

 
sergio

Sergio Augusto Carminitti

Engineer from Sethi3D

Graduated in Electrical Engineering from the University of São Francisco, 20 years ago. He has worked in several companies such as Philips, Sony Ericsson, Venturus. For 7 years he has been working in the development area as Sethi3D Engineering Manager.

 
Vagner Rogerio

Vagner Rogério dos Santos

Consultant for Wietech and Researcher at Unifesp

As a UNIFESP researcher in Assistive Technologies for Ophthalmological and Neurological Rehabilitation, Vagner works on developing microsurgical instruments. At POLI-USP’s High Performance Computing Lab, he does research on Technologies for Smart Cities and IoT Systems for Health Support. He is an entrepreneur with experience in education and training, and in 2008-2015 was occasionally a guest lecturer on Assistive Technologies and Technological Interfaces in the Postgraduate course at FAAP. He is Doctor of Science and holds an MBA in Management, both from UNIFESP. Vagner is an R&D consultant for SENAI-SP, Intertrade and Wietech specializing in precision mechanics devices, microcontroller devices, and programming of embedded systems for satellite applications and communication. His main areas of focus are: ophthalmic bioengineering, medical product development, development and innovation of aerospace technologies, programming technology for embedded software in mechatronics, and medical and rehabilitation equipment.

 
wilson-amaral

Wilson do Amaral Neto

Applications Engineer at SKA Automação

A Mechanical Engineer trained at the Mackenzie School of Engineering and a Master in Aerospace Systems and Mechatronics from the Aeronautics Institute of Technology, Wilson has been in additive manufacturing for over 15 years. He is an Applications Engineer with experience in Fused Deposition Modeling (FDM) and Polyjet technologies, both belonging to Stratasys. In that time, he has installed equipment, trained professionals and instructed its users. Today, still as an Applications Engineer, he specializes in presenting equipment and its operation to new clients, or consulting on new applications for clients who already are well-versed in the use of this technology. He also gives lectures and presentations at events such as FEIMEC, FEIMAFE and Intertooling, and at educational institutions like Mackenzie, SENAIs, USP, universities and federal institutes.

Atualizada no dia 26/04